PalmOne Treo 600 Soft Reset and Hard Reset Instruction Manual Guide
Performing Soft Reset PalmOne Treo 600
Unscrew the stylus tip to access the reset tool.
Turn the device over and locate the pin-hole labeled Reset.
Insert the reset tool into the pin-hole to press and hold the Reset button.
Continue to hold the Reset button for approximately 5 seconds, then release.
Remove the reset tool from the pin-hole.
The device has been soft reset.
PalmOne Treo 600 Hard Reset Performing
Unscrew the stylus tip to access the reset tool.
Press and hold the Wireless Mode button.
While continuing to hold the Wireless Mode button, turn the device over and use the reset tool to gently press and release the reset button on the back of the Treo 600 (do not release the Wireless Mode button).
While continuing to hold the Wireless Mode button, turn the device over (so that the display screen is visible).
When the Palm Powered logo appears, release the Wireless Mode button.
When the Erase all data? prompt appears, press Up (on the 5-way navigation control) to confirm the Hard Reset.
Power the device on and perform initialization (digitize screen, select language, etc.).
Restore data.
For detail of PalmOne Treo 600 Soft Reset and Hard Reset Instruction Manual Guide can be found here
sponsored links
Filed in: Palm Manual
Leave a Reply